null
Categories

RaceQuip SFI 16.1 HANS/HNR Latch & Link 6-Point Harness Set - Black (718008)

Brand :

(No reviews yet) Write a Review
MSRP: $124.94
$119.95
(You save $4.99 )
SKU:
ds_BJGT_718008
UPC:
887753137104

RaceQuip SFI 16.1 HANS/HNR Latch & Link 6-Point Harness Set - Black

RaceQuip’s Latch & Link 6-point HANS / HNR auto racing harness set has twin individual shoulder belts that are reduced to 2" above the adjusters to more easily accomodate a HANS or Head and Neck Restraint Device. These belts are manufactured using premium 3" polyester webbing and drop forged steel hardware to exceed the SFI 16.1 rating. Shoulders adjust from 20" to 62" and the lap belt adjusts from 20" to 60". All RaceQuip 718 series belts come as a "pull down lap" design, which means that the lap belts must be pulled down and away from the center latch & link buckle mechanism to tighten. All RaceQuip Latch & Link motorsports harness sets are distinguished by a pivoting "hammer," called a Duckbill, which is located on the lap belt and locks all of the belts into place by snapping down into a detent. Both shoulder belts and the dual sub-belt are hooked over the link; the link is inserted into the latch on the lap belt; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place. Since RaceQuip seat belt sets are "double adjustable", lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place with the supplied ends. Snap hook ends and eyebolts are sold separately if the user wishes to install belts in that manner.

Features:

  • Exceeds SFI 16.1 Rating (SFI tags affixed)
  • Premium 3" polyester webbing
  • Twin individual shoulder belts
  • 2" shoulder accomodates HANS/HNR device
  • Pull down style lap belt
  • 6 Point Design
  • Dual 2" crotch strap
  • Pivoting "hammer," called a Duckbill, which is located on the lap belt and locks all of the belts into place by snapping down into a detent
  • Double adjustable for ease of installation
  • Wrap around or bolt-in mounting
  • Drop-forged steel hardware (no bolts)
  • Shoulders adjust from 20" to 62"
  • Lap belt adjusts from 20" to 60"
  • Available in Black and Red

Note:

  • NOT D.O.T./FMVSS Certified for On Highway Use
  • For racing vehicle use ONLY
  • Designed to be mounted in a race vehicle to a rollcage or harness bar
  • No mounting bolts included
  • One "set" of seat belts, or one harness "set" is an assortment of lap, shoulder, and crotch belts for one seat only
  • One belt set = one seat
  • Never leave out the crotch strap or any of the belts that come in a harness set or severe injury will occur in the event of an impact

Note: Image is of the Red belt and for reference only. This part number (#718008) is for the BLACK belt.

Part Number Color
718008 Black
718018 Red

Customers Also Viewed